Technical Support

Linksys EtherFast Cable/DSL Routers

(For product details visit www.linksys.com)


Linksys EtherFast Cable/DSL Routers provide NAT (Network Address Translation) and port mapping.

Computers and devices behind the router all have 192.168.1.X IP addresses, which are translated into a single public IP address by the router.

To run a server behind the router, incoming TCP/IP traffic must be "mapped" to the server on a private IP address (192.168.1.X) based on port numbers.

linksy1 Log into the router (open http://192.168.1.1 in your browser), Username is blank and the password is admin if you have not already changed this.

 

 

 

 

 

 

 

 

Select the "Forwarding" tab. In an available line, enter the service port you wish to open and the IP address of the computer which will handle the requests

 .

NOTE: If you are running servers (any type) behind a NAT router, the DNS records for these servers must point to the public Internet IP address - not the private server IP address (192.168.X.X).

For more information or to post questions or comments about the use of our products please visit our Online Support Forum.


Skip Navigation LinksHome > Legacy > Online Help > Help On: Linksys EtherFast Cable/DSL Routers

Copyright ©MyServer.org, 2000-2017   All Rights Reserved
last modified: 4/18/2008 9:02:32 PM
Contact Us   |   Site Map   |   Login   |   Terms of Use   |   Privacy Policy
7/24/2017 9:56:55 AM